Our Products

Our Products

Concrete Permeability Apparatus

  1. Single Cell / Three Cell Model. as per IS :3085 -1965 RA 1997, with Gun metal / brass permeability cell & stand fitted with pressure gauge, water reservoir & measuring cylinder of 1 ltr. capacity for each cell. Suitable for concrete specimen of 150mm dia. x 150mm height supplied without compressor.
  2. Single Cell / Three Cell Model. as per IS :3085-1965 RA 1997, with Gun metal / brass permeability cell & stand fitted with pressure gauge, water reservoir & measuring cylinder of 1 ltr. Capacity for each cell. Suitable for concrete specimen of 100mm dia. x 100mm height supplied without compressor.

Digital Compression Cum Flexure Testing Machine

Capacity 2000kN, fabricated load frame without lead screw but provided with different heights of spacers and a separate Electrically Operated Pumping Unit with two outlets and isolation valves. A Flexural Load Frame for concrete beam of size 15cm x 15cm x 70cm and one dual channel microprocessor based Digital Load Indicator range 0 - 2000 KN x 2 KN & 0 - 100 KN x 0.5 KN with peak hold facility. RS-232 output can also be supplied for compression load indicator.Works on 415 Volt 3 phase Electrical supply. Supplied with our own calibration certificate traceable to National Standards.

Beam Mould

  1. Beam Mould with base plate, as per IS : 516, IS: 10086-1982 made of Cast Iron. Size : 10 x 10 x 50 cm.
  2. Beam Mould with base plate, as per IS : 516, IS: 10086-1982 made of Cast Iron. Size : 15 x 15 x 70 cm.
  3. Beam Mould with base plate, as per IS : 516, IS: 10086-1982 made of Cast Iron. Size : 15 x 15 x 75 cm.
  4. Beam Mould with base plate, as per IS : 516, IS: 10086-1982 made of Cast Iron. Size : 25 x 25 x 140 MM

Cylindrical Mould

  1. Mould, Cylindrical, made of Cast Iron with base plate, as per IS : 10086-1982. Size :150 mm dia x 300 mm height.
  2. Mould, Cylindrical, made of Cast Iron with base plate, as per IS : 10086-1982. Size :50 mm dia x 100 mm height.
  3. Mould, Cylindrical, made of Cast Iron with base plate, as per IS : 10086-1982. Size : 75 mm dia x 150 mm height.
  4. Mould, Cylindrical, made of Cast Iron with base plate, as per IS : 10086-1982. Size : 100 mm dia x 200 mm height.
  5. Mould, Cylindrical, made of Cast Iron with base plate, as per IS : 10086-1982. Size : 300 mm dia x 600 mm height.

Mould

Mould for 5 cm cube with base plate, made of Cast Iron, as per IS : 4031 (Part-I), IS :10080-1982

  1. Cast Iron Mould for 7.06 cm cube, with loose base plate with "ISI" Mark, as per IS : 4031, IS : 10080-1982.
  2. Cast Iron Mould for 10 cm cube, Cast Iron with base plate, with "ISI" Mark, IS : 516, IS : 10086 - 1982.
  3. Cast Iron Mould for 15 cm cubes, with loose base plates. IS : 516, IS : 10086 - 1982, with "ISI" Mark.
  4. Cast Iron Mould for 20 cm cubes, as per IS : 516, IS : 10086 - 1982
  5. Cast Iron Mould for 30 cm cubes, as per IS : 516, IS : 10086 - 1982

Vibrating Table, Motorised

As per IS : 2514-1963, Table top with border to prevent walk off moulds complete with mould holder at centre with Standard Motor. Suitable for operation on 230 Volts, single Phase, 50 Hz supply. As per IS : 2514-1963, Table top with border to prevent walk off moulds complete with mould holder at centre with Standard Motor. Suitable for operation on 230 Volts, single Phase, 50 Hz supply. Table Top Size 50 x 50cm Single Spring , open type.